1
						2		3
			4												5
													6
7
										8
9						10			11
				12
								13

Across 2. Full protective _____ shall be worn by those members operating, or in close proximity to the operation of the Rescue Tool. 4. Precautions shall be taken to protect the trapped and injuries from further injuries during the operation (i.e. sparks, propelled objects, flying glass, etc.), and a _____ 1 3/4" hose line in place, manned by personnel in full protective clothing. 7. _____ the control valve on the power plant to the setting for the hoses that the tool is connected to. 8. NOTE: THE SPREADER SHOULD BE LEFT IN THE _____ POSITION LEAVING A SMALL AMOUNT OF PLAY IN THE TIPS TO ALLOW FOR CHANGING IF NECCESSARY. 9. To provide eye protection, allowing for the event of a hose or coupling failure where fluid could be expelled; all members in the area of operation of the tool shall place their face shield in the _____ position to provide for such protection. 10. All the tools should be operated by one _____ at a time. 12. The tool engine should be kept away from the injured and placed down ____ of the work area. 13. NOTE: SHOULD FLUID GET INTO THE EYES, THE EYES SHOULD BE FLUSHED IMMEDIATELY WITH COPIOUS AMOUNTS OF ____ AND THE PERSON SHOULD SEEK MEDICAL ASSISTANCE.

Down 1. NOTE: ONLY _____ OIL SHALL BE USED IN THE HYDRAULIC PUMP. 3. The _____ may either hold the spreader by the two lateral handles or at the center handle. 4. When _____ an object, do not try to force the cutter in one position, let it move down on its own. 5. The operator should use both ____ on the tools. The left hand on the small handle and the right hand on the control handle. 6. ____ down on the release bars on top of each arm and slide out the tip. 10. Connect the hoses to the tools prior to starting the motor in the power ____. 11. If using to ____, close the arms and stick the tips into the area to open.