OPEN -END -WRENCH		MOST COMMON HAMMER USED INTHE AUTOMOTIVE SHOP
BALL-PEEN-HAMMER		USED TO CUT METAL PARTS
DRIVE-SIZES		HAS A SMALL LEVER THAT CAN BE MOVED FOR EITHER LOOSENING OR TIGHTENING BOLTS
DIAGONAL-CUTTERS		HAS JAWS THAT CAN BE ADJUSTED TO DIFFERENT SIZE BOLTS AND NUTS
EXTENSIONS		DETERMINED BY MEASURING ACROSS THE WRENCH JAWS
CENTER-PUNCH		SWIVEL THAT LETS THE SOCKET WRENCH REACH AROUND OBSTRUCTIONS
HACKSAW		REMOVES BURRS, NICKS, AND SHARP EDGES
SLIP-JOINT-PLIERS		REMOVES GREASE, GASKETS, SLUDGE, AND DRIED OIL ON PARTS
SCREWDRIVER		WHEN STRUCK WITH A HAMMER, THE DRIVER EXERTS POWERFUL TURNING AND DOWNWARD FORCES
SLEDGE-HAMMER		HAS AN OPEN END OR SPLIT JAW ON BOTH ENDS
RATCHET		TOOL SIZES ARE GIVEN IN FRACTIONS OF AN INCH
UNIVERSAL-JOINT		HELPFUL DURING ASSEMBLY, DISASSEMBLY, AND ADJUSTMENT OPERATIONS
SPEED-HANDLE		ALLOWS THE JAWS TO BE ADJUSTED TO GRASP DIFFERENT SIZE PARTS
COMBINATION-WRENCH		GRASPS NONMAGNETIC PARTS
MIRROR-PROBE		THE FASTEST HAND OPERATED SOCKET HANDLE
CHISEL		USED TO REMOVE AND INSTALL SCREWS
CONVENTIONAL		HAS A BOX-END JAW ON ONE END AND AN OPEN-END JAW ON THE OTHER
ADJUSTABLE-WRENCH		SIX SIDED SHAFT WRENCH
FINGER-PICKUP		A CYLINDER SHAPED BOX-END TOOL FOR REMOVING AND INSTALLONG BOLTS AND NUTS
SCRAPER		USED TO MARK PARTS FOR REASSEMBLY
PRY-BAR		USED TO HOLD PARTS DURING CUTTING, DRILLING, HAMMERING, AND PRESSING OPERATIONS
TOOLBOX		USED FOR CUTTING OFF DAMAGED OR BADLY RUSTED BOLTS, NUTS, AND RIVETS
VISE		USED FOR HANDLING EXTREMELY SMALL PARTS OR REACHING INTO HIGHLY RESTRICTED AREAS
STARTING-PUNCH		IS AN ADJUSTABLE WRENCH USED TO GRASP CYLINDRICAL OBJECTS
WRENCH -SIZE		STORES AND PROTECTS TECHNICIANS TOOLS WHEN NOT IN USE
FILES		JAW SHAPE ALLOWS THEM TO CUT ITEMS FLUSH WITH AND ADJACENT SURFACE
IMPACT-DRIVER		USED TO DRIVE PIN, SHAFTS, AND METAL RODS PARTWAY OUT OF A HOLE
ALLEN-WRENCH		ALLOWS YOU TO LOOK AROUND CORNERS OR BEHIND PARTS
NEEDLE-NOSE-PLIERS		USED WHEN BREAKING LOOSE LARGE OR EXTREMELY TIGHT BOLTS AND NUTS
BREAKER-BAR		SOMETIMES USED TO FREE FROZEN PARTS
LINE-WRENCH		ALLOW THE HANDLE TO BE PLACED FARTHER FROM THE WORK PIECE
PIPE-WRENCH		THE SIZE OF THE SQUARE OPENING FOR THE RATCHET OR TOOL HANDLE
SOCKET		BOX-END WRENCH WITH A SMALL OPENING OR SPLIT IN THE JAW